Total Views (Browse): 1 -- Total Views (Search): -- IP: 216.73.216.118 -- Visitors:

Original Title
İç Anadolu Bölgesinde Yetişmiş Birinci Sınıf Sarı Çam Kerestesi ile Yapılan Pencere Köşe Birleşimine Ait Basınç Dayanımlarının Karşılaştırılması Üzerine Araştırma

Authors
Ömer Can, M. Mustafa Önal

Journal
Sigma : Mühendislik ve Fen Bilimleri Dergisi

Volume
Eylül 2007, Volume 25, Issue 3, p. 283-296

Keywords
Köşe Birleştirmeler ; Yapı Kerestesi ; Sarıçam ; Ahşap

Abstract
Bu çalışmada ; 1. Sınıf sarıçam kerestesinden kertme tipi köşe birleştirme, üç dişli ve dört dişli geçme tipi köşe birleştirme şekillerinden her birinden 10'ar adet hazırlanmıştır. Numunelerin yapıştırılmasında polivinilasetat (PVA) yapıştırıcısı kullanılmıştır. Numuneler üzerinde basınç mukavemeti deneyi yapılmıştır. Yapılan deney sonucunda aşağıdaki sonuç bulunmuştur. Birleşim yönünden en iyi basınç mukavemeti sırası ile kertme geçme tipi köşe birleştirme, üç dişli geçme tipi köşe birleştirme ve dört dişli geçme tipi köşe birleştirme olarak belirlenmiştir. Birleştirme şekillerinde basınç mukavemeti ortalama değerleri içerisinde en iyi değeri kertme geçme birleşimi 1, 74 kg / cm2, üç dişli geçme birleşimi 0, 89 kg / cm2 ve dört dişli geme birleşimi 0, 80 kg / cm2 vermiştir.

Title (Foreign Language)
An Investigation on the Copmarison of the Compressive Srength of Corner Joints of Window Which Were Prepared Using First Class Yellow Pine Wood Grew at the Central Anatolia

Keywords (Foreign Language)
End Joining ; Timber Used in Construction ; Yellow Pine ; Wood

Abstract (Foreign Language)
In this study 10 number of tree different, type of corner joints were prepared by first class yellow fir wood. First type of corner joint is grooved, the other type is 3 toothed, and the last type is 4 toothed. For gluing of samples Polivinilasetat glue was used. Compressive strength tests were performed on these samples. As a result, samples having the highest compressive strength are groove type joint, then 3 toothed joint finally 3 toothed joint. Compressive strength's values for grooved, 3 toothed and 4 toothed joints are measured as 1, 74 kg / cm2, 0, 89 kg / cm2, and 0, 80 kg / cm2, respectively