Görüntüleme (gezinme ile): 8 -- Görüntüleme (arama ile): -- IP: 3.134.77.195 -- Ziyaretçi Sayısı:

Özgün Başlık
An Experimental Study of Mechanical Effect in Cleaning Process

Yazarlar
Yusuf Koç, Hasan Alpay Heperkan

Dergi Adı
Sigma : Mühendislik ve Fen Bilimleri Dergisi

Cilt
Eylül 2015, Cilt 33, Sayı 3, ss. 285-392

Anahtar Kelimeler
Mechanical impact ; water jet ; jet force ; impact surface ; nozzle ; flow rateç

Özet
Cleaning is the process of using water and detergent to remove soil, rust stains or other deposits from surfaces. The cleaning performance is the most important competitive factor. The main parameters that influence the cleaning performance are chemicals, water temperature, cleaning time and mechanical impact on the surfaces. This paper is related with mechanical impact of cleaning processes. A Water Jet Test Apparatus was used to measure the force, generated by a jet of water as it strikes the surface under various experimental conditions. Measured values were between 0.09 and 0.49 N, these were a function of flow rates, angle of impact surface, distance from nozzle to impact surface and cross-sectional area of nozzle. The results showed that the higher flow rate provides a greater impact force with the same nozzle. If the cross-sectional areas of nozzles increase, the water jet impact forces decrease on similar flow rate values. For same experimental conditions, the jet impact force increases with angle of impact surfaces, reaches a maximum value on 90º. The most effective parameter on force was impact of flow rate. As a result of tests, effectiveness of impact of flow rates were 59%, effectiveness of cross-sectional areas of nozzles were 21% and effectiveness of angle of impact surfaces were 15%. The impact of distance from nozzle to surface had limited effect on the jet force.

Başlık (Yabancı Dil)
Yıkama İşleminde Mekanik Etkinin Deneysel Olarak İncelenmesi

Anahtar Kelimeler (Yabancı Dil)
Mekanik etki ; su jeti ; jet kuvveti ; etki yüzeyi ; nozul ; debi

Özet (Yabancı Dil)
Yıkama prosesi, kullanım sonunda yüzey üzerinde kalan kirlerin uzaklaştırılması amacıyla gerçekleştirilmekte olup, sıcaklığın, mekanik hareketin ve sulu deterjan çözeltisinin bir arada kullanımını temel almaktadır. Gerçekleştirilen bu çalışmada yıkama işleminde kir çıkarma performansını etkileyen faktörlerden mekanik etki incelenmiştir. Çalışma kapsamında kurulan deney düzeneğinde, nozul sisteminden çıkacak suyun etki yüzeyinde oluşturacağı su jeti kuvveti ; debi, etki yüzeyi ile nozul arasındaki mesafe, etki yüzeyi açısı ve nozul çıkış kesit alanına bağlı olarak deneyler gerçekleştirilmiştir. Deney sırasında ölçülen kuvvetler 0.09 ve 0.49 N aralığında değişmektedir. Aynı çıkış kesit alanına sahip nozulda debi arttıkça, suyun yüzeyde oluşturacağı jet kuvveti artmaktadır. Kesit alanı azaldıkça su jetinin uyguladığı kuvvet artmaktadır. Kuvvet üzerindeki baskın değişkenler incelendiğinde debi ve nozul kesit alanının etkisi sırasıyla %59 ve %21 mertebelerinde olduğu belirlenmiştir. Etki yüzeyinin açısının etkisi ise %19’dur. Etki yüzeyi ile nozul arasındaki mesafenin kuvvet üzerindeki etkisi sınırlıdır.