Görüntüleme (gezinme ile): 3 -- Görüntüleme (arama ile): -- IP: 18.117.183.252 -- Ziyaretçi Sayısı:

Özgün Başlık
Farklı Penetrasyon Derecelerine Sahip Asfalt Çimentolarının Kalıcı Deformasyona Karşı Dayanımlarının ve İşlenebilirliklerinin İncelenmesi

Yazarlar
Kuloğlu, Necati, Mehmet Yılmaz, Baha Vural Kök

Dergi Adı
Uludağ Üniversitesi Mühendislik - Mimarlık Fakültesi Dergisi

Cilt
2008, Cilt 13, Sayı 1, ss. 81-91

Anahtar Kelimeler
Asfalt Çimentosu ; Performans Seviyesi ; Dinamik Kayma Reometresi ; Dönel Viskozimetre

Özet
Ülkemizde esnek üstyapılarda en çok kullanılan bağlayıcı türü asfalt çimentolarıdır. Bu çalışmada TÜPRAŞ rafinerisinden temin edilen dört farklı penetrasyon sınıfında asfalt çimentolarının (B 50 / 70, B 70 / 100, B 100 / 150 ve B 160 / 220) Superpave sistemine göre tekerlek izi dayanımları ve yüksek sıcaklık performans seviyesi değerleri dinamik kayma reometresi (DSR) ile belirlenmeye çalışılmıştır. Ayrıca işlenebilirliklerini tespit etmek amacıyla dönel viskozimetre (RV) kullanılmıştır. Elde edilen sonuçlardan bağlayıcıların penetrasyonları arttıkça viskozitelerinin ve tekerlek izi oluşumuna karşı dayanımlarının azaldığı belirlenmiştir. Superpave sistemine göre tekerlek izine karşı dayanım parametresi bakımından bağlayıcıların yüksek sıcaklık performans seviyesi değerlerinin yüksek penetrasyondan düşük penetrasyona doğru PG 58, PG 64, PG 64 ve PG 70 olduğu tespit edilmiştir. DSR deneyleri sonucunda B 70 / 100 ve B 100 / 150 bitümlü bağlayıcılarının penetrasyon sınıflandırmasına göre farklı sınıflarda yer almalarına rağmen Superpave sistemine göre aynı performans seviyesinde yer aldıkları tespit edilmiştir.

Başlık (Yabancı Dil)
Investigation of Resistance to Permanent Deformation and Workability of the Different Penetration Grades Asphalt Cements

Anahtar Kelimeler (Yabancı Dil)
Asphalt Cement ; Performance Grade ; Dynamic Shear Rheometer ; Rotational Viscosimeter

Özet (Yabancı Dil)
The most binder types used in flexible pavements are asphalt cements in our country. In this study the rutting resistance and performance grades high temperature values of four different penetration grades of asphalt cements (B 50 / 70, B 70 / 100, B 100 / 150 and B 160 / 220) obtained from TUPRAS refinery were determined according to Superpave system by using DSR test equipment. In addition the rotational viscosimeter test equipment was used to determine the workability of binders. From the results it was determined that when the penetration grades of asphalt cements is increasing the viscosities and resistance of the binders to rutting are decreasing. Regarding the parameter of resistance of binders to rutting it was determined that the high temperature values performance grades of binders ranged from high penetration grade to lower penetration grade as PG 58, PG 64, PG 64 and PG 70 according to Superpave system. Although the B 70 / 100 and 100 / 150 place in different class according to penetration classification, it was determined that they placed in same performance grade according to Superpave system by DSR test.