Görüntüleme (gezinme ile): -- Görüntüleme (arama ile): -- IP: 3.143.218.146 -- Ziyaretçi Sayısı:

Özgün Başlık
Değiştirilebilir Sanal Enstrümanlar Teknolojisi ile Kalibrasyon Otomasyonu Uygulamalarında Performans Artırılması

Yazarlar
Osman Torunoğlu, Nurhan Karaboğa

Dergi Adı
Savunma Bilimleri Dergisi

Cilt
Mayıs 2012, Cilt 11, Sayı 1, ss. 19-40

Anahtar Kelimeler
Kalibrasyon ; Otomasyon ; IVI standartları

Özet
Bu çalışmada elektronik ölçüm cihazlarının periyodik kalibrasyonunun daha hızlı ve yüksek doğruluklu yapılabilmesi amacıyla, yeni nesil yazılım ve donanım destekleri kullanılarak kalibrasyon prosedürlerinin otomasyonu gerçeklenmiştir. Ölçüm cihazlarının kontrolünde son yıllarda ön plana çıkan Değiştirilebilir Sanal Cihazlar (Interchangeable Virtual Instruments, IVI) teknolojisini kalibrasyon otomasyonu yazılımında kullanılarak, otomasyon sisteminin performansının ve esnekliğinin arttırılması hedeflenmiştir. IVI standartlarının sunduğu cihazların değiştirilebilirliği (interchangeability), cihaz benzetimi (simulation) ve durum önbelleklemesi (state-caching) özellikleri ile sistemin uzun süreçte idame ettirilebilirliğinin sağlanması örnek bir uygulamada gösterilmiştir. Ayrıca bir kalibrasyon otomasyonunun asıl hedefi olan zaman ve insan gücü tasarrufuna yazılım parametrelerinin etkisi örnek uygulama üzerinden ele alınmıştır.

Başlık (Yabancı Dil)
Performance Enhancement in Calibration Automation Applications Using Interchangeable Virtual Instruments

Anahtar Kelimeler (Yabancı Dil)
Calibration ; Automation ; IVI standards

Özet (Yabancı Dil)
In this study, calibration procedures are automated using novel software and hardware support in order to obtain high accuracy and faster process in the periodical calibration activities of the electronic measurement instruments. The performance and flexibility of the automation system are intended to be increased by the employment of the Interchangeable Virtual Instruments (IVI) technology which has emerged recently in the control of the measuring instruments. The long-term maintainability of the system is demonstrated in a sample of application using the interchangeability, the simulation and the state-caching properties of the IVI standards. Also, the effect of the software parameters on the time and workforce savings which are the real target of the calibration automation is discussed in the sample of application.