Görüntüleme (gezinme ile): 3 -- Görüntüleme (arama ile): 1 -- IP: 3.141.202.187 -- Ziyaretçi Sayısı:

Özgün Başlık
Geri Dönüştürülebilir Kullanılmış Kâğıttan Kâğıt Üreten Bir Tesiste Shoe (Pabuç) Pres Ünitesi Uygulanmasının, Kurutma Ünitesinin İşletme ve Yatırım Maliyetine Olan Etkisi

Yazarlar
Andaç Yakut, Galip Temir

Dergi Adı
Sigma : Mühendislik ve Fen Bilimleri Dergisi

Cilt
Eylül 2012, Cilt 30, Sayı 3, ss. 341-349

Anahtar Kelimeler
Kâğıt kurutma ; kurutma silindiri ; kuruluk derecesi ; enerji tasarrufu

Özet
Kâğıt üretim tesislerinde en fazla enerji tüketimi kurutma ünitesinde olur. Genel olarak kurutma ünitesine girişte kâğıdın kuruluk derecesi %40-50 arasındadır. Kurutma ünitesine giren kâğıdın kuruluk derecesi arttırılacak (nem miktarı azaltılacak) olursa kurutma ünitesinde enerji tasarrufuna gidilebilir. Son zamanlarda presleme etkinliğini arttırmak için shoe (pabuç) pres ünitesi uygulaması yapılmaktadır. Bu çalışmada bir kâğıt üretim tesisinin kurutma ünitesine giren kâğıdın %49 olan kuruluk derecesi, shoe (pabuç) pres ünitesi uygulanması ile %55’e çıkartıldığında, yapılan hesaplamalar sonucunda 8 adet daha az buharla ısıtılan kurutma silindiri ile istenilen kuruluk derecesinde kâğıt elde edilebildiği görülmüştür.

Başlık (Yabancı Dil)
The Effect of Paper Dryness to the Number of Drying Cylinder in Drying Cylinders

Anahtar Kelimeler (Yabancı Dil)
Paper drying ; drying cylinders ; dryness ; energy savings

Özet (Yabancı Dil)
The most energy consuming section of the paper production facilities is the drying section. In general, the dryness of the paper at the entrance of the drying section is about 40 to 50%. If the degree of dryness of the paper entering the drying unit will be increased (moisture content will be decreased) energy savings can be achieved in drying unit. Shoe press units are used to improve the press effectiveness recently. In this study, it is observed that the number of drying cylinders can be reduced by 8 units according to our calculations when the dryness of the paper entering to the drying section of a paper production facility is increased from 49 to 55% with the desired degree of dryness.