Görüntüleme (gezinme ile): 4 -- Görüntüleme (arama ile): 1 -- IP: 18.224.214.215 -- Ziyaretçi Sayısı:

Özgün Başlık
Kadastrodaki Yenileme Kavramına Vizyonel Bir Bakış

Yazarlar
Okan Yıldız, Yakup Emre Çoruhlu, Osman Demir

Dergi Adı
Sigma : Mühendislik ve Fen Bilimleri Dergisi

Cilt
Aralık 2015, Cilt 33, Sayı 4, ss. 503-519

Anahtar Kelimeler
Kadastro ; kadastral yenileme ; kadastral duyarlılık

Özet
Bilindiği gibi, Türkiye’de günümüze kadar farklı duyarlılıkta ve ölçü yöntemleriyle kadastro çalışmaları yapılmış ve kadastro paftaları üretilmiştir. Bu paftalar günümüzde geçerliliğini korumakla beraber, bu ürünlerden arzu edilen standartlara sahip olmayanlar yenilenmektedir. Böylece ülke genelinde tüm kadastro teknik altyapısının istenen nokta-konum duyarlılığına sahip olması amaçlanmaktadır. Bu çalışma ile esas olarak ; teknik yönden yetersiz paftaların yenilenmesinde mevcut durumunun ortaya konması ve yapılan yenileme işleminin kadastro niteliğinde olup olmadığı ve yeterliliği vizyonel bir bakış açısı ile değerlendirilecektir. Özellikle son zamanlarda kadastro sektörünün Uluslararası Haritacılar Birliği (FIG) çatısı altındaki gelişimi, kadastro parselinin arazi nesnesi olarak tanımlanması, 3D kadastro yaklaşımları, Avrupa Birliği Konumsal Veri Altyapısı (INSPIRE) direktifleri, kadastrodan beklentileri daha da artırmaktadır. Bu noktada, uluslararası beklentilerin karşılanması adına ülkemiz kadastro sisteminde daha çok işlerin yapılması gerektiği görülmektedir. Türkiye’deki mevcut yenileme çalışmaları göz önüne alındığında, uygulama yöntemleri açısından her ne kadar temel kadastro çalışmalarıyla oldukça fazla ortak yönlere sahip olsa da, sonuçları itibarı ile sadece paftaların konum duyarlılıklarının artırılması ve sayısal forma dönüştürülmesi işleminden ibaret olduğu görülmektedir. Buna göre bu çalışmaların uluslararası gündem ve Türkiye’nin ihtiyaçları dikkate alınarak kapsam ve içeriğinin geliştirilmesi gerekmektedir.

Başlık (Yabancı Dil)
A Visional Overview to Renovation Concept on Cadastral Works in Turkey

Anahtar Kelimeler (Yabancı Dil)
Cadastre ; cadastral renovation ; cadastral accuracy

Özet (Yabancı Dil)
As known, from the beginning till now cadastral works have been done to accomplish different aims with different surveying methods and times, different accuracy for each point on bases. All these cadastral bases are valid and used now. However, some of the bases which have not enough accuracy can be renewed. Thanks to the renovation process on cadastral works / bases, all cadastral bases in the country can be transferred from insufficient form in terms of point accuracy into the sufficient form. Revealing the current process and progress on transformation on cadastral bases, which have not wanted / desired point accuracy for each point on them, from the insufficient form into the sufficient form and investigation whether these renovation process / progress can be defined as nature of cadastre are the aim of the study. In recent times, expanding the cadastral sector over the whole world under the FIG perspective, 3D cadastre approaches, INSPIRE directives increases further the expectations from the cadastre and cadastre related works. At this point, it is observed that a lot of cadastral works in Turkish cadastral system must be carried out in the name of performing the international expectations from cadastral works. Considering the current renovation works on cadastre bases in Turkey, even if renovation work has a lot in common with the basic surveying work in terms of application methods, renovation works are considered as increasing the accuracy of the bases in terms of each point accuracy on them, and to be converted them from classical format into digital form, To ensure this, it is necessity of development of the renovation scope and content and then these renovations should be carried out in this way.